Wall OUT™ self-adhesive external bumper, GY-graphite, 50 x 250 cm

Weather-resistant flexible bollard

Wall OUT™ is particularly recommended for use in facilities such as private and underground car parks, exits from car parks and underground garages, parking bays, walkways and narrow passages between building walls, and functional spaces such as garages or industrial workshops exposed to varying temperatures and weather conditions such as sunlight, UV radiation or precipitation!

Selected properties and benefits of Wall OUT™:

• thickness, including the adhesive layer, approx. 2.5 mm
• excellent resistance to weather conditions such as sunlight, UV radiation and precipitation!
• application temperature: -20 - +50°C
• quick and clean installation - self-adhesive; no need to pay extra for adhesives or adhesive tape
• fire resistance to BS1 standard
• reduces noise caused by objects striking the wall or kerb
• High-quality, colourless adhesive layer with an additional mesh
• the flexibility of the bumper allows for smooth application, even around wall corners and columns

Installation instructions and notes:

1. Measure the height of the area on the wall that you intend to protect
2. Order a bumper of the appropriate dimensions
3. After unpacking, unfold it flat and leave it at a temperature of at least 20°C for 24 hours (especially in winter, when temperatures are low)
4. Clean the surface onto which the protective strip is to be installed using a dry cloth and prime the wall (the wall should also be primed before painting). The surface to be protected must be absolutely dry at the time of installation, and the temperature during installation should be at least 10°C
5. Stick the bumper strip down from left to right, or vice versa. Do not peel off the entire plastic backing straight away - only uncover the section you are sticking down at that moment
6. Press down firmly with your hand or a rubber roller

Due to the wide variety of external surfaces, a test application should be carried out on each specific surface before installation. Technical tests have confirmed the effectiveness of installation on surfaces and materials such as: vibrated concrete, high-strength concrete, smooth-surfaced concrete free from cracks and irregularities such as protruding pieces of stone, ceramic walls such as ceramic hollow blocks and solid bricks, glass panes, black and stainless steel, powder-coated sheet metal, and many others. Installation on surfaces such as textured sand-finish or lambswool-finish plaster is not recommended.

The bumper achieves full adhesion to the surface approximately 24 hours after application.

The result depends largely on the quality of the wall finish, surface unevenness, the care taken during preparation (prior priming) and the bonding process itself. It is recommended that the bumper be installed by two people from a qualified service team.

The strong adhesive used by Mathey System bonds the bumper very permanently to the wall material. During removal, fragments of paint, plaster or plasterboard may be dislodged.

Apply the skirting board 14 days after the surface has been painted.